FaciliPro™ Heavy Duty Low Odor Floor Stripper

Features & Benefits:

Designed to remove zinc-free & zinc containing floor finishes

Dual purpose for full strip out or removal of top layers prior to recoating

Non-corrosive to skin and hard water tolerant

Multi-functional, high-performing finish remover

Fewer products, less inventory and simplified recoating training

Safer for employees and conducive to all water conditions.

Uses/Solutions:

Before use on asphalt or rubber tile, test use-dilution in a hidden area to ensure bleaching, bleeding, or softening will not occur.

DO NOT use on linoleum or wood floors.

Effective Against/On:

Suitable for use on vinyl and vinyl asbestos floor tiles, ceramic tile, terrazzo, and concrete floors.

Dilutions:

• Normal-build up - 14 US fl oz (414 mL) per gallon of cold water (1:9)
• Heavy-build up - 21 US fl oz (621 mL) per gallon of cold water (1:6)
• Top layer removed - 2 US fl oz per gallon of cold water (1:64)

Directions for Use:

Full Strip Out

1. Dilute product in cold water. Apply liberally with mop and allow solution to dwell for 10 minutes (allow 15 minutes for heavy build-up). Do not allow solution to dry. Scrubbing will aid in the removal of heavy build-up.
2. Pick up solution with wet vac, autoscrubber, or mop. Always follow the manufacturer's directions for proper equipment use.
3. Rinse the floor thoroughly with clean, cool water and a clean mop or autoscrubber. Allow floor to dry before applying floor finish.

Removal of Top Layers Prior to Recoating

1. Deep scrub with diluted Heavy Duty Low Odor Finish remover and cold water, using a blue pad. Recommend use of hand pump to accurately dilute solution. Rinse well and let dry.

Additional Notes:

• Always use COLD water for dilution.
• For removing only the top layers prior to recoating, use 2 US fl oz (59 mL) per gallon of cold water (1:64).
• Triple rinse, then offer container for recycling, or if not available, comply with other disposal regulations. Always wear proper protective equipment.
• Dispose of excess stripper (concentrated or diluted) in drain with plenty of cold water, or by any other method in accordance with local, state and federal laws.
• Never dump product outside.