FaciliPro™ 35 Alkaline Floor Cleaner

Features & Benefits:

Dual Action Chemistry - Superior cleaning ability vs. amine or surfactant only floor cleaners

Ultra low foaming chemistry - Increases autoscrubber efficiency

Fresh Fragrance - Leaves a clean scent rather than a chemical odor

Uses/Solutions:

Daily maintenance and scrub and recoat use

Effective Against/On:

Effective on finished resilient and other natural and man-made floor types

Automatic Scrubber

1. Position wet floor signs. Put on proper safety equipment.
2. Mix cleaning solution in the auto scrubber and mop bucket using appropriate dilution rate per gallon of water.
3. Position the red pad onto the auto scrubber.
4. Using the auto scrubber, apply the cleaning solution, scrub and pick up residue in one operation.
5. Mop the corners and edges manually and remove any excess solution not recovered by the auto scrubber.
6. Thoroughly clean and store all equipment and pads after use.
7. Remove wet floor signs.

Mop and Bucket

1. Position wet floor signs. Put on proper safety equipment.
2. Mix cleaning solution in the mop bucket using appropriate dilution rate per gallon of water.
3. Use a cotton or synthetic mop with cleaning solution.
4. Partially wring out mop and apply cleaning solution to approximately 10' by 10' area of floor surface. Thoroughly wring out mop in bucket and pick up excess solution from the 10' by 10' area.
5. Repeat step 4 until the entire floor area has been cleaned.
6. Thoroughly clean and store all equipment after use.
7. Remove wet floor signs.

Equipment Needed:

• Damp mop (cotton or synthetic)
• Mop bucket with wringer
• Auto scrubber
• Red pads
• Wet floor signs
• Proper safety equipment (goggles, gloves and appropriate footwear)