Back

MAXX Dual Action Floor Cleaner (Bright Speed)

Alkaline floor cleaner.

  • Guest Supply Item Number: 24697
  • Ecolab PIC: 6100428
  • GTIN Number: 10025469573176
Features & Benefits

Features & Benefits:

Dual Action Chemistry

Superior cleaning ability to amine or surfactant only floor cleaners

Ultra low foaming chemistry

Increases autoscrubber efficiency

Fresh Fragrance

Leaves a clean scent rather then a chemical odor

Uses/Solutions:

For daily cleaning and scrub and recoat use

For use on finished resilient and other natural and man-made floor types.

Effective Against/On:

For use on finished resilient and other natural and man-made floor types.

How To Use

Dilution Rate:

2.5 gal and 64 oz:

  • Daily Cleaning: 1:1024, 1/8 oz/gal
  • Medium Soil: 1:512, 1/4 oz/gal
  • Deep Scrub for scrub and recoat: 1:128, 1 oz/gal

1.3 Ltr QC:

  • Daily Cleaning: 1:256, 1/2 oz/gal
  • Deep Scrub for scrub and recoat: 1:64 2 oz/gal

Directions for Use:

Automatic Scrubber

  1. Position wet floor signs. Put on proper safety equipment.
  2. Mix solution in the auto scrubber and mop bucket using appropriate dilution rate per gallon of water.
  3. Position the red pad onto the auto scrubber.
  4. Using the auto scrubber, apply the cleaning solution, scrub and pick up residue in one operation.
  5. Mop the corners and edges manually and remove any excess solution not recovered by the auto scrubber.
  6. Thoroughly clean and store all equipment and pads after use.
  7. Remove wet floor signs.

Mop and Bucket

  1. Position wet floor signs. Put on proper safety equipment.
  2. Mix solution in the mop bucket using appropriate dilution rate per gallon of water.
  3. Use a cotton or synthetic mop with cleaning solution.
  4. Partially wring out mop and apply cleaning solution to approximately 10' by 10' area of floor surface. Thoroughly wring out mop in bucket and pick up excess solution from the 10' by 10' area.
  5. Repeat step 4 until the entire floor area has been cleaned.
  6. Thoroughly clean and store all equipment after use.
  7. Remove wet floor signs.
Top
alert-icon

This site uses cookies and other technologies to offer you a better browsing experience, analyze site traffic, and provide you with personalized content. By using this site, you consent to our use of cookies. Read our Privacy Policy as well as our Cookie Policy for more information.