StoneMedic™ CGI Ceramic Grout Impregnator

Features & Benefits:

Innovative, water-based formula that penetrates the pore structure of grout

Uses/Solutions:

Use on ceramic tile and grout

Effective Against/On:

Repels water, soil and grease from grout

Directions for Use:

1. Shake well before use.
2. Apply StoneMedic™ CGI Ceramic Grout Impregnator using a pump up sprayer, roller, or applicator pad. Avoid pouring material directly on the surface.
3. Allow 15 minutes for penetration.
4. Remove all excess with a squeegee followed by wiping with a dry absorbent cloth to ensure no product remains on the surface.
5. If after the 15 minute dwell time, no excess is visible, wait 2 hours and reapply, allow to stand, and remove as above.

Additional Notes:

• Treated area may be opened to foot traffic in 2 hours, but refrain from deep cleaning for 24 hours.
• Maximum stain protection is not achieved for up to 24 hours.
• The area to be impregnated should be totally clean, dry, and free of any topical coatings.
• Allow newly installed floors to cure prior to impregnating.
• This product does not provide protection from sub floor humidity.

WARNING:

• This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.