FaciliPro™ 73 Disinfecting Acid Bathroom Cleaner

Features & Benefits:

Formulated to break down hard water build-up and soap scum on bathroom surfaces.

Disinfects at low-use concentrations (8-12 oz./gal.)

Disinfects in 5-minutes.

Pleasant soapy fragrance for reduced acid flashback

Non-abrasive; won't scratch

Uses/Solutions:

Recommended for use in bathrooms, shower rooms and spas for disinfecting and cleaning walls, floors, tubs, showers, and other hard non-porous environmental surfaces such as bathroom fixtures, sinks, exterior surfaces of toilets, non-food contact surfaces of coolers, glazed tile, linoleum, plastic (such as polyethylene, polypropylene, polyvinylchloride, chrome, glazed porcelain, stainless steel and glass)

Claims Set: E-Coli, MRSA, Hepatitis A and B, Influenza, Herpes, RSV, Salmonella and others (please refer to the product label)

Effective Against/On:

Hard water build-up and soap scum from tubs, showers, countertops, toilets and sinks.

Directions for Use:

For hospital disinfection and cleaning of hard non-porous surfaces according to the AOAC Use-Dilution Test method in 400 ppm hard water, in the presence of 5% blood serum and 0.005% soap residue.

Apply 73 Disinfecting Acid Bathroom Cleaner to hard non-porous surfaces only, thoroughly wetting surfaces with a sprayer. All surfaces must remain wet for 5-minutes.

Preparation of Use-Solution:

For Disinfection and Daily Cleaning:

• Dilute at 1:16 (8 oz) - 1:10.7 (12 oz) per gallon of water. Pre-clean heavily soiled areas. Apply use solution to hard non-porous surfaces only, thoroughly wetting surfaces with a sprayer.
• All surfaces must remain wet for 5-minutes.
• Wipe surfaces with damp cloth or sponge
• Rinse surface

For Disinfection and Heavy Duty Cleaning:

• Mix 8-12 oz per gallon of water, apply use-solution to hard nonporous surfaces, thoroughly foaming surfaces with a sprayer
• Allow a 5-minute contact with the surface
• Wipe with damp cloth or sponge
• Rinse surface.

Cleaning Procedures:

• Blood/body fluids must be thoroughly cleaned from surfaces and objects before application of 73 Disinfecting Acid Bathroom Cleaner
• This cleaning may be accomplished with any cleaning solution, including this product
• Contact Time: 5 minutes

Non-Food Contact Surface Sanitizing:

• Apply 8.0 oz. per 1 gallon of water, for hard, non-porous environmental surfaces
• Apply product with a coarse trigger sprayer, wet cloth, mop, scrubber, or by soaking
• Treated surfaces must remain wet for 5-minutes
• Wipe dry with a sponge, mop, or cloth or allow to air dry

Additional Notes:

• Superior in hard water conditions.
• Not for use on PVD coated fixtures and finishes or soft metals.
• Penetrates tough soap scum and hard water stains
• Not for use on marble